top of page
Pos-I-Tie and Thermal-Grip Brick Tie Washers from TRUFAST Walls

Brick veneer anchor. Continuous insulation attachment.

Anchors brick veneer through continuous insulation to steel, wood or masonry structure while maintaining air barrier performance when used with Thermal-Grip® brick tie washer. Attaches all types of rigid insulation.

Pos-I-Tie® Masonry Veneer Anchoring System

Anchors Masonry Veneer

- Rigid Insulation and air barrier system manufacturer approved

​

- Transfers compression and tension loads to the structure ensuring long term air barrier performance

​

- Available with Triangle or Pintle style wire ties

​

- Self-drilling screw tip for drilling into steel studs. Coarse tip available for wood or masonry substrates

​

- Lengths in 5/8", 1", 1-1/2", 2", 2-1/2", 3", 3-1/2", 4", & 4-1/2", additional sizes upon request

Wire ties and screw tips available.

Available with SDS style screw tip for steel studs or coarse screw tip for drilling into wood studs or CMU/concrete.

​

Various size wire ties available in both triangle style or pintle style with Thermal-Grip accessory which reduces thermal bridging. Wire ties available in both stainless or hot dip galvanized.

Pos-I-Tie Veneer Anchoring System from TRUFAST Walls being used to attach continuous rigid insulation
Brick Tie washers from Rodenhouse Inc.
01:23
trufastwalls

Brick Tie washers from Rodenhouse Inc.

For brick veneer cavity wall construction use Pos-I-Tie veneer anchors available from Rodenhouse Inc. combined with our Thermal-Grip brick-tie washers. This combination can greatly reduce the number of screws and washers required for insulation attachment which reduces not only material and labor cost, but also reduces the number of penetrations through the insulation and weather barrier. Once installed add the triangle wire tie for brick joint embedment. For added thermal efficiency the Thermal-Clip accessory and a pintle style wire ties can be used in lieu of triangle wire ties to prevent thermal bridging through the anchor. Please contact Rodenhouse Inc. with further questions. Website: http://www.rodenhouse-inc.com Brick Tie Washer: http://rodenhouse-inc.com/products/thermal-grip-brick-tie-washer-w-pos-i-tie/ Facebook: https://www.facebook.com/Rodenhouse-Inc-Fastening-Systems-674962019207488/?fref=ts www.rodenhouse-inc.com (T) 616-454-3100 gripline@rodenhouse-inc.com
Thermal-Grip® brick tie washer with Pos-I-Tie® demo
00:48
trufastwalls

Thermal-Grip® brick tie washer with Pos-I-Tie® demo

For brick veneer cavity wall construction use Pos-I-Tie veneer anchors available from Rodenhouse Inc. combined with our Thermal-Grip brick-tie washers. This combination can greatly reduce the number of screws and washers required for insulation attachment which reduces not only material and labor cost, but also reduces the number of penetrations through the insulation and weather barrier. Once installed add the triangle wire tie for brick joint embedment. For added thermal efficiency the Thermal-Clip accessory and a pintle style wire ties can be used in lieu of triangle wire ties to prevent thermal bridging through the anchor. Please contact Rodenhouse Inc. with further questions. www.rodenhouse-inc.com (T) 616-454-3100 gripline@rodenhouse-inc.com

AIR-BARRIER PERFORMANCE. LABOR SAVINGS.

 

TRUFAST® Wall Products are designed with

energy efficiency and labor savings in mind, taking traditional installation methods and improving for better building performance. 

SUBSCRIBE FOR PRODUCT NEWS, VIDEOS AND ARTICLES STRAIGHT TO YOUR INBOX.

bottom of page