top of page
Plasti-Grip PMF Anchor fastening Insulation to concrete

Insulation Plastic Masonry Fastener

Plastic washer head nail mechanically attaches insulation to concrete / masonry.

Plasti-Grip® PMF Anchor

Plastic Masonry Fastener

- Round 2-1/4" diameter plastic tapered plate

​

- No pins, screws, or adhesives required

​

- Simple to install: Pre-drill and hammer flush

​

- Pre-drill hole with 5/16" masonry bit

​

- Solid plastic design reduces thermal bridging through insulation

SPECS

SpecLink Product Listing - RGB - Blue Text.png
No Moisture.png
No Air.png

Continuous insulation attachment. Reduces thermal-bridging.

Attaches rigid continuous insulation to concrete / masonry substrates. Available in multiple lengths for foam thicknesses or 1/2" - 5". Pre-drill hole with 5/16" masonry bit, then tap flush with hammer. 2-1/4" diameter head sits flush on insulation.

​

Use for fastening EPS foam in PB EIFS systems, rigid foam insulation, and waterproofing drainage fabric into concrete or masonry block applications.

​

*Patented and/or Patent Pending

Available Lengths

Thickness of Insulation

Pieces / Carton

6 1/4"
4 1/4" - 5"
200
5 3/8"
3 1/2" - 4"
200
4 1/2"
2 1/2" - 3"
250
3 1/2"
1 1/2" - 2"
250
2 3/4"
1" - 1 1/2"
250
2"
1/2" - 3/4"
250
Plasti-Grip PMF Anchor from TRUFAST Walls

WATCH THE VIDEO

PLASTI-GRIP® PMF Anchor from Rodenhouse Inc. attaches insulation to Concrete Block or CMU
00:23
trufastwalls

PLASTI-GRIP® PMF Anchor from Rodenhouse Inc. attaches insulation to Concrete Block or CMU

The PLASTI-GRIP PMF Anchor, or Plastic Masonry Fastener, from Rodenhouse Inc. attaches insulation to CMU or Concrete Block. This solid plastic nail is thermally efficient and is easily installed using a 5/16" masonry bit and a hammer. Simply pre-drill the hole through the insulation and into the block, place the PMF into the hole and tap it flush with the hammer. A quick and simple solution! Website: http://rodenhouse-inc.com/ PLASTI-GRIP® PMF Anchor: http://rodenhouse-inc.com/products/plasti-grip-pmf-plastic-masonry-fastener/ Facebook: https://www.facebook.com/Rodenhouse-Inc-Fastening-Systems-674962019207488/ Instagram: https://www.instagram.com/rodenhousefasteningsystems/
Plasti-Grip® PMF from Rodenhouse Inc.
00:33
trufastwalls

Plasti-Grip® PMF from Rodenhouse Inc.

When attaching rigid insulation or mineral wool to a concrete or brick substrate use Plasti-Grip PMF fasteners which are available in various lengths for insulation ½” – 5” in thickness. Pre-drill a 5/16” dia. hole through the insulation and into the masonry substrate, press the fastener into the hole, and tap flush with a hammer. No screws or pins are required creating a thermally efficient and corrosion resistant method of attachment. For more information please contact Rodenhouse Inc. www.rodenhouse-inc.com gripline@rodenhouse-inc.com (T) 616-454-3100

AIR-BARRIER PERFORMANCE. LABOR SAVINGS.

 

TRUFAST® Wall Products are designed with

energy efficiency and labor savings in mind, taking traditional installation methods and improving for better building performance. 

SUBSCRIBE FOR PRODUCT NEWS, VIDEOS AND ARTICLES STRAIGHT TO YOUR INBOX.

bottom of page