Fasteners for use with Dow THERMAX ™ (ci)
In this video you will see 3 approved methods of attaching THERMAX™ (ci) continuous insulation including First our Grip-Lok® auto-feed fastening system, second our Plasti-Grip® III fastener with pre-spotting stem, and third our Plasti-Grip® PMF fastener for concrete and block substrates.
|
Plasti-Grip® CBW attaching commercial building wrap and lath
Grip-Lok® fastening system attaching commercial building wrap and lath to gypsum/steel studs. Our Plasti-Grip CBW® washers can be used for attaching rigid foam insulation, lath, air/moisture membranes, and building wrap.
|
Grip-Lok® nose attachment on pneumatic nailer
Grip-Lok® fastening system attaching commercial building wrap to gypsum/steel studs. Our Plasti-Grip® CBW washers can be used for attaching rigid foam insulation, lath, air/moisture membranes, and building wrap
|
Plasti-Grip® CBW washer attaching rigid foam
Grip-Lok® fastening system attaching rigid foam insulation to gypsum/steel studs. Our Plasti-Grip CBW® washers can be used for attaching rigid foam insulation, lath, air/moisture membranes, and building wrap.
|
PBLP2 Foam Installation
PBLP2 are 2" diameter, high-density polypropylene washers used for attaching EPS foam board to various substrates. More information, including pricing, is available here.
|
Get the Flash Player to see this player.
|
PMF Installation
PMF Plastic Fasteners are 2-3/8" diameter high-density polypropylene plastic nail used for attaching EPS foam board to concrete and masonry substrates. |
Get the Flash Player to see this player.
|
Rodenhouse Tyvek Installation at Gallery on Fulton
CBW2 is designed for securing Tyvek® (or other house/building wrap, drainage fabric, or air barrier sheeting) over exterior gypsum such as Dens-Glass Gold® to steel studs on commercial buildings. |
Get the Flash Player to see this player.
|
New Plasti-Grip® CBW washer
New Plasti-Grip® CBW washer is designed for securing Tyvek®, PACTIV®, TYPAR® (or other commercial building wrap, drainage fabric, or air barrier sheeting) over exterior gypsum such as Dens-Glass Gold® to steel studs on commercial buildings.
|
Get the Flash Player to see this player.
|
New Plasti-Grip® CBW washer
New Plasti-Grip® CBW washer is designed for securing Tyvek®, PACTIV®, TYPAR® (or other commercial building wrap, drainage fabric, or air barrier sheeting) over exterior gypsum such as Dens-Glass Gold® to steel studs on commercial buildings.
|
Get the Flash Player to see this player.
|
New Plasti-Grip® CBW washer
New Plasti-Grip® CBW washer is designed for securing Tyvek®, PACTIV®, TYPAR® (or other commercial building wrap, drainage fabric, or air barrier sheeting) over exterior gypsum such as Dens-Glass Gold® to steel studs on commercial buildings.
|
Get the Flash Player to see this player.
|
New Plasti-Grip® CBW washer
The new Plasti-Grip® CBW washer was tested at the ATI Test facilities, in York, PA., securing PACTIV® GreenGuard® commercial building wrap and the RainDrop® drainage fabric over exterior gypsum on various 8’ x 8’ control test panels. Results were plotted in (compliance with ASTM and ICC standards), for fastener spacing, after repeated exposure to moisture, water intrusion cycles, and negative & positive wind loading. Test results data, available upon request.
|
Get the Flash Player to see this player.
|
Call Toll Free: 1-800-249-GRIP (4747)
or contact us.